The dripper nozzle feeds into the top holder part from above, do not try to fit it by pushing it in from the front as it will not sit properly. The lower part of the holder is a ‘V’ shape that the tip of the nozzle will sit in when positioned correctly.
Question:
How should the dripper nozzle be fitted on the KH Manager?
Answer:
The positioning of the dripper nozzle is very important for the correct operation of the KH Manager, if it is out of position the drips will not fall within the detection zone of the sensors resulting in incorrect testing or sensor error alerts.
Depending on the age of the KH Manager there are two different holder types for the dripper nozzle. Please see the images below.
Find Stockist Version 1
Version 2
The dripper nozzle feeds into the top holder part from above, do not try to fit it by pushing it in from the front as it will not sit properly. The lower part of the holder is a small hole that the tip of the nozzle will sit through.
After positioning the dripper nozzle check that the hose and adapter connection are pushed firmly into the dripper tip so they do not leak and that the hose is not kinked or pulled tight.