The fitting on the Clarisea is a PVC-U Solvent weld socketed elbow. This will fit standard aquarium grade solvent weld pressure pipe, if you want to use rigid pipework to plumb in the unit. We recommend either using a union or not gluing the pipework in to the elbow on the Clarisea so that the unit can be removed easily for maintenance.

 

Alternatively a solvent weld hosetail can be glued in to the elbow on the Clarisea unit to then allow it to accept flexible pipework.

 

The main overflow for the aquarium is normally plumbed directly in to the Clarisea but if this is not possible a pump can be used to supply a water feed to the unit.